Berling, D.; Mehdaoui, A.; Loegel, B.; Leggieri, G.; DeGiorgi, M. L.; Luches, A.; DelVecchio, A.; Tapfer, L. AC susceptibility measurements of films with different structural qualities Article de journal Dans: Journal of Alloys and Compounds, vol. 251, no. 1-2, p. European Mat Res Soc, 1997. @article{Berling1997,
title = {AC susceptibility measurements of films with different structural qualities},
author = { D. Berling and A. Mehdaoui and B. Loegel and G. Leggieri and M. L. DeGiorgi and A. Luches and A. DelVecchio and L. Tapfer},
doi = {10.1016/S0925-8388(96)02794-6},
year = {1997},
date = {1997-04-01},
journal = {Journal of Alloys and Compounds},
volume = {251},
number = {1-2},
pages = {European Mat Res Soc},
abstract = {Superconducting ReBa2Cu3O7 (R=Y, Er) epitaxial thin films were deposited by reactive laser ablation on YSZ (Yttria Stabilized Zirconia) and SrTiO3 substrates under various conditions, The structural quality of the films were characterized by complete XRD measurements. The superconducting properties have been investigated by AC susceptibility in an extended AC fields range (h(AC)less than or equal to 400 Oe). We focused our attention on the imaginary part chi ''(T) (loss peak) for fields applied parallel and perpendicular to the film surface. The use of ''high'' parallel AC fields leads to a precise determination of the irreversibility lines (LL) in the (h(AC), T) plane. The IL are weakly frequency dependent and exhibit a nearly linear behavior. The observation of fine structures of the loss peak are correlated to the presence of different phases and/or grain orientations.},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
Superconducting ReBa2Cu3O7 (R=Y, Er) epitaxial thin films were deposited by reactive laser ablation on YSZ (Yttria Stabilized Zirconia) and SrTiO3 substrates under various conditions, The structural quality of the films were characterized by complete XRD measurements. The superconducting properties have been investigated by AC susceptibility in an extended AC fields range (h(AC)less than or equal to 400 Oe). We focused our attention on the imaginary part chi ''(T) (loss peak) for fields applied parallel and perpendicular to the film surface. The use of ''high'' parallel AC fields leads to a precise determination of the irreversibility lines (LL) in the (h(AC), T) plane. The IL are weakly frequency dependent and exhibit a nearly linear behavior. The observation of fine structures of the loss peak are correlated to the presence of different phases and/or grain orientations. |
Siebold, Alain; Walliser, André; Nardin, Michel; Oppliger, Max; Schultz, Jacques Capillary Rise for Thermodynamic Characterization of Solid Particle Surface Article de journal Dans: J. Colloid Interface Sci., vol. 186, no. 1, p. 60–70, 1997, ISSN: 0021-9797. @article{Siebold1997,
title = {Capillary Rise for Thermodynamic Characterization of Solid Particle Surface},
author = { Alain Siebold and André Walliser and Michel Nardin and Max Oppliger and Jacques Schultz},
url = {http://www.sciencedirect.com/science/article/B6WHR-45KN1JP-6S/2/c5a363ef78b5a8020acff4c7a94a0840},
issn = {0021-9797},
year = {1997},
date = {1997-02-01},
journal = {J. Colloid Interface Sci.},
volume = {186},
number = {1},
pages = {60--70},
abstract = {Surface properties in terms of surface free energy of solid particles were investigated using capillary rise experimental methods based on Washburn's equation. Two different approaches related to height and weight gain measurements were validated by silica flour and calcium carbonate surface studies. Dispersive components of the surface free energy and nondispersive components of solid-liquid energy of interaction were computed. Some differences observed are related to experimental data acquisitions. Many experimental difficulties, which led in the past to inaccurate wettability characteristics, have been controlled. A new link to the so-called geometrical factor of Washburn's equation has also been established after comparison of theoretical and experimental static and hydrodynamic radii. The high precision of the weight gain approach was achieved by strict control of experimental parameters such as temperature, powder packing, and sintered glass porosity.},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
Surface properties in terms of surface free energy of solid particles were investigated using capillary rise experimental methods based on Washburn's equation. Two different approaches related to height and weight gain measurements were validated by silica flour and calcium carbonate surface studies. Dispersive components of the surface free energy and nondispersive components of solid-liquid energy of interaction were computed. Some differences observed are related to experimental data acquisitions. Many experimental difficulties, which led in the past to inaccurate wettability characteristics, have been controlled. A new link to the so-called geometrical factor of Washburn's equation has also been established after comparison of theoretical and experimental static and hydrodynamic radii. The high precision of the weight gain approach was achieved by strict control of experimental parameters such as temperature, powder packing, and sintered glass porosity. |
Bubendorff, J. L.; Pflaum, J.; Huebner, E.; Raiser, D.; Bucher, J. P.; Pelzl, J. Correlation between topographic and magnetic properties of electrochemically prepared nickel films Article de journal Dans: Journal of Magnetism and Magnetic Materials, vol. 165, no. 1-3, p. 199–201, 1997. @article{Bubendorff1997c,
title = {Correlation between topographic and magnetic properties of electrochemically prepared nickel films},
author = { J. L. Bubendorff and J. Pflaum and E. Huebner and D. Raiser and J. P. Bucher and J. Pelzl},
doi = {10.1016/S0304-8853(96)00506-9},
year = {1997},
date = {1997-01-01},
journal = {Journal of Magnetism and Magnetic Materials},
volume = {165},
number = {1-3},
pages = {199--201},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
|
DelVecchio, A.; Tapfer, L.; Berling, D.; Loegel, B.; Leggieri, G.; Luches, A.; Acquaviva, S. Slow laser deposition of high quality ErBa2Cu3O7-x thin films Article de journal Dans: Journal of Vacuum Science & Technology A-vacuum Surfaces and Films, vol. 14, no. 5, p. 2854–2858, 1996. @article{DelVecchio1996,
title = {Slow laser deposition of high quality ErBa2Cu3O7-x thin films},
author = { A. DelVecchio and L. Tapfer and D. Berling and B. Loegel and G. Leggieri and A. Luches and S. Acquaviva},
doi = {10.1116/1.580235},
year = {1996},
date = {1996-09-01},
journal = {Journal of Vacuum Science & Technology A-vacuum Surfaces and Films},
volume = {14},
number = {5},
pages = {2854--2858},
abstract = {High quality ErBa2Cu3O7-x thin films were grown by reactive laser deposition on yttria-stabilized zirconia substrate. The structural and electrical properties of the samples were investigated by x-ray double-crystal diffractometry, texture analysis and reciprocal space mapping, and resistivity measurements, respectively. The best films were obtained by using high substrate temperature combined with a low fluence and low laser repetition rate. In these conditions the deposition rate results were very low, namely <0.25 Angstrom/s. We found that in this case we can grow films with a very high degree of crystalline perfection. Preliminary results show that this process promotes the fabrication of very thick films (thickness >500 nm) which are highly c-axis oriented. (C) 1996 American Vacuum Society.},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
High quality ErBa2Cu3O7-x thin films were grown by reactive laser deposition on yttria-stabilized zirconia substrate. The structural and electrical properties of the samples were investigated by x-ray double-crystal diffractometry, texture analysis and reciprocal space mapping, and resistivity measurements, respectively. The best films were obtained by using high substrate temperature combined with a low fluence and low laser repetition rate. In these conditions the deposition rate results were very low, namely <0.25 Angstrom/s. We found that in this case we can grow films with a very high degree of crystalline perfection. Preliminary results show that this process promotes the fabrication of very thick films (thickness >500 nm) which are highly c-axis oriented. (C) 1996 American Vacuum Society. |
Arnault, J. C.; Bubendorff, J. L.; Pimpinelli, A.; Bucher, J. P. Transition in the growth kinetics of vacancy islands on NbSe2 Article de journal Dans: Surface Science, vol. 348, no. 1-2, p. 185–191, 1996. @article{Arnault1996,
title = {Transition in the growth kinetics of vacancy islands on NbSe2},
author = { J. C. Arnault and J. L. Bubendorff and A. Pimpinelli and J. P. Bucher},
doi = {10.1016/0039-6028(95)00963-9},
year = {1996},
date = {1996-03-01},
journal = {Surface Science},
volume = {348},
number = {1-2},
pages = {185--191},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
|
Berling, D.; Beille, J.; Loegel, B.; Mehdaoui, A.; Noudem, J. G.; Tournier, R. Complex susceptibility of superconducting BiPbSrCaCuO ceramics fabricated through combined magnetic melt texturing and hot pressing Article de journal Dans: Superconductor Science & Technology, vol. 9, no. 3, p. 205–210, 1996. @article{Berling1996b,
title = {Complex susceptibility of superconducting BiPbSrCaCuO ceramics fabricated through combined magnetic melt texturing and hot pressing},
author = { D. Berling and J. Beille and B. Loegel and A. Mehdaoui and J. G. Noudem and R. Tournier},
doi = {10.1088/0953-2048/9/3/013},
year = {1996},
date = {1996-03-01},
journal = {Superconductor Science & Technology},
volume = {9},
number = {3},
pages = {205--210},
abstract = {Complex a.c. susceptibility measurements in a broad field range (1 Oe < h(ac) < 100 Oe) have been made on Bi-Pb-Sr-Ca-Cu-O (Bi-2223 phase) bulk samples obtained by combined magnetic melt texturing and hot pressing. Highly anisotropic properties are observed. Improved intergranular coupling is obtained in the direction perpendicular to the applied stress and the magnetic field direction. An intragranular peak is also observed for the same direction. This is the first time that an intragranular loss peak has been clearly seen in a bismuth-based compound, which indicates that the intragranular contribution is strongly increased.},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
Complex a.c. susceptibility measurements in a broad field range (1 Oe < h(ac) < 100 Oe) have been made on Bi-Pb-Sr-Ca-Cu-O (Bi-2223 phase) bulk samples obtained by combined magnetic melt texturing and hot pressing. Highly anisotropic properties are observed. Improved intergranular coupling is obtained in the direction perpendicular to the applied stress and the magnetic field direction. An intragranular peak is also observed for the same direction. This is the first time that an intragranular loss peak has been clearly seen in a bismuth-based compound, which indicates that the intragranular contribution is strongly increased. |
Sharma, Ashutosh; Reiter, Günter Instability of Thin Polymer Films on Coated Substrates: Rupture, Dewetting, and Drop Formation Article de journal Dans: J. Colloid Interface Sci., vol. 178, no. 2, p. 383–399, 1996, ISSN: 0021-9797. @article{Sharma1996,
title = {Instability of Thin Polymer Films on Coated Substrates: Rupture, Dewetting, and Drop Formation},
author = { Ashutosh Sharma and Günter Reiter},
url = {http://www.sciencedirect.com/science/article/B6WHR-45R76GG-1/2/31ff21c06dec6e26e9a382e68fb15dde},
issn = {0021-9797},
year = {1996},
date = {1996-03-01},
journal = {J. Colloid Interface Sci.},
volume = {178},
number = {2},
pages = {383--399},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
|
Berling, D.; Bolmont, D.; Loegel, B.; Mehdaoui, A. AC susceptibility of HTSC in the low field limit Article de journal Dans: Solid State Communications, vol. 97, no. 8, p. 731–735, 1996. @article{Berling1996b,
title = {AC susceptibility of HTSC in the low field limit},
author = { D. Berling and D. Bolmont and B. Loegel and A. Mehdaoui},
doi = {10.1016/0038-1098(95)00579-X},
year = {1996},
date = {1996-02-01},
journal = {Solid State Communications},
volume = {97},
number = {8},
pages = {731--735},
abstract = {Initial AC susceptibility measurements on REBa(2)Cu(3)O(7-delta) (RE = Y, Er), Bi2Sr2CaC2O8+delta and HgBa2Ca2Cu3O8+delta polycrystals are used in order to obtain the irreversibility lines (IL) in the (h(ac), T) plane. The deviation of IL from linearity below a critical field value h(c)* is discussed and related to the dimensionality of the compound. The effects of the fabrication techniques are also discussed.},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
Initial AC susceptibility measurements on REBa(2)Cu(3)O(7-delta) (RE = Y, Er), Bi2Sr2CaC2O8+delta and HgBa2Ca2Cu3O8+delta polycrystals are used in order to obtain the irreversibility lines (IL) in the (h(ac), T) plane. The deviation of IL from linearity below a critical field value h(c)* is discussed and related to the dimensionality of the compound. The effects of the fabrication techniques are also discussed. |
Berling, D.; DelVecchio, A.; Leggieri, G.; Loegel, B.; Luches, A.; Mehdaoui, A.; Tapfer, L. Superconducting properties of epitaxial laser ablated thin films Article de journal Dans: Solid State Communications, vol. 97, no. 8, p. 657–661, 1996. @article{Berling1996a,
title = {Superconducting properties of epitaxial laser ablated thin films},
author = { D. Berling and A. DelVecchio and G. Leggieri and B. Loegel and A. Luches and A. Mehdaoui and L. Tapfer},
doi = {10.1016/0038-1098(95)00637-0},
year = {1996},
date = {1996-02-01},
journal = {Solid State Communications},
volume = {97},
number = {8},
pages = {657--661},
abstract = {We present experimental results obtained for high quality epitaxial thin films (film thicknesses around 5000 Angstrom rocking curve FWHM down to 0.1 degrees). These films are obtained by laser ablation of REBa(2)Cu(3)O(7-delta) (RE = Y, Er) deposited on SrTio(3) and YSZ substrates. The superconducting properties have been studied by complex susceptibility in an extended AC field range (h(ac) less than or equal to 300 Oe) and show sharp magnetic transition width and high critical currents (10(7) A cm(-2) < j(c)(77 K) < 10(8) A cm(-2)). The loss peak is only weakly depressed by an increasing AC held and the observed shifts are up to an order of magnitude lower than those observed for intragranular contributions in bulk samples. The agreement with the behaviour expected from a critical state model is also discussed.},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
We present experimental results obtained for high quality epitaxial thin films (film thicknesses around 5000 Angstrom rocking curve FWHM down to 0.1 degrees). These films are obtained by laser ablation of REBa(2)Cu(3)O(7-delta) (RE = Y, Er) deposited on SrTio(3) and YSZ substrates. The superconducting properties have been studied by complex susceptibility in an extended AC field range (h(ac) less than or equal to 300 Oe) and show sharp magnetic transition width and high critical currents (10(7) A cm(-2) < j(c)(77 K) < 10(8) A cm(-2)). The loss peak is only weakly depressed by an increasing AC held and the observed shifts are up to an order of magnitude lower than those observed for intragranular contributions in bulk samples. The agreement with the behaviour expected from a critical state model is also discussed. |
MEHDAOUI, A.; BERLING, D.; BOLMONT, D.; LOEGEL, B. Activation-energies In Superconducting High-temperature Ceramics Article de journal Dans: Materials Science and Engineering B-solid State Materials For Advanced Technology, vol. 34, no. 2-3, p. 132–137, 1995. @article{MEHDAOUI1995,
title = {Activation-energies In Superconducting High-temperature Ceramics},
author = { A. MEHDAOUI and D. BERLING and D. BOLMONT and B. LOEGEL},
doi = {10.1016/0921-5107(95)01249-4},
year = {1995},
date = {1995-11-01},
journal = {Materials Science and Engineering B-solid State Materials For Advanced Technology},
volume = {34},
number = {2-3},
pages = {132--137},
abstract = {Low field a.c. susceptibilities of HgBa2Ca2Cu3O8+delta (Hg-1223) and Bi2Sr2CaCu2O8+delta (Bi-2212) have been studied. The loss peak of chi '', relevant to intergranular pinning, shifts to higher temperatures for increasing frequencies. The results can be fitted with an Arrhenius law, leading to activation energies E(a) approximate to 1 eV, but the hopping frequencies f(0) are not realistic. More realistic values can be obtained by introducing a Fulcher law or a power law which is also characteristic of strongly interacting systems.},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
Low field a.c. susceptibilities of HgBa2Ca2Cu3O8+delta (Hg-1223) and Bi2Sr2CaCu2O8+delta (Bi-2212) have been studied. The loss peak of chi '', relevant to intergranular pinning, shifts to higher temperatures for increasing frequencies. The results can be fitted with an Arrhenius law, leading to activation energies E(a) approximate to 1 eV, but the hopping frequencies f(0) are not realistic. More realistic values can be obtained by introducing a Fulcher law or a power law which is also characteristic of strongly interacting systems. |
BERLING, D.; ANTIPOV, E. V.; CAPPONI, J. J.; GORIUS, M. F.; LOEGEL, B.; MEHDAOUI, A.; THOLENCE, J. L. Low-field Ac Susceptibility In Hg-1223 Polycrystals Article de journal Dans: Physica C, vol. 225, no. 3-4, p. 212–217, 1994. @article{BERLING1994,
title = {Low-field Ac Susceptibility In Hg-1223 Polycrystals},
author = { D. BERLING and E. V. ANTIPOV and J. J. CAPPONI and M. F. GORIUS and B. LOEGEL and A. MEHDAOUI and J. L. THOLENCE},
doi = {10.1016/0921-4534(94)90716-1},
year = {1994},
date = {1994-05-01},
journal = {Physica C},
volume = {225},
number = {3-4},
pages = {212--217},
abstract = {The complex AC susceptibility of HgBa2Ca2Cu3O8+delta(Hg-1223) has been studied for DC magnetic fields 0 Oe less-than-or-equal-to H(DC) less-than-or-equal-to 50 Oe and AC magnetic fields 0.1 Oe less-than-or-equal-to h(AC) less-than-or-equal-to 70 Oe allowing the determination to be made of the irreversibility line both in the (H(DC), T) plane and in the (h(AC), T) plane. The critical dynamic field h(c)* has furthermore been obtained in the low AC field limit. All these results are consistent with a strong increase of the intergranular pinning strength which is one order of magnitude higher than in similar as-sintered 123 compounds, suggesting possibilities for the critical currents.},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
The complex AC susceptibility of HgBa2Ca2Cu3O8+delta(Hg-1223) has been studied for DC magnetic fields 0 Oe less-than-or-equal-to H(DC) less-than-or-equal-to 50 Oe and AC magnetic fields 0.1 Oe less-than-or-equal-to h(AC) less-than-or-equal-to 70 Oe allowing the determination to be made of the irreversibility line both in the (H(DC), T) plane and in the (h(AC), T) plane. The critical dynamic field h(c)* has furthermore been obtained in the low AC field limit. All these results are consistent with a strong increase of the intergranular pinning strength which is one order of magnitude higher than in similar as-sintered 123 compounds, suggesting possibilities for the critical currents. |
MEIGNAN, S.; PONCHE, A. M.; TENENBAUM, N. Secondary Hyperparathyroidism And Articular Chondrocalcinosis In The Elderly Article de journal Dans: Revue Du Rhumatisme, vol. 58, no. 11, p. 809–811, 1991. @article{MEIGNAN1991,
title = {Secondary Hyperparathyroidism And Articular Chondrocalcinosis In The Elderly},
author = { S. MEIGNAN and A. M. PONCHE and N. TENENBAUM},
year = {1991},
date = {1991-01-01},
journal = {Revue Du Rhumatisme},
volume = {58},
number = {11},
pages = {809--811},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
|
Soppera, O; Hsia-Wen, Zan; Lin, H -C; Stehlin, F; Spangenberg, A; Wieder, F; Yeh, C -C ROCÉDÉ PERMETTANT L'OBTENTION DE NANO-DISPOSITIFS À SEMI-CONDUCTEUR COMPRENANT DES FILMS MINCES D'OXYDE MÉTALLIQUE À MOTIF DÉPOSÉS SUR UN SUBSTRAT ET NANO-DISPOSITIFS À SEMI-CONDUCTEUR CORRESPONDANTS Patent WO2016177694, 0000. @patent{Soppera2016,
title = {ROCÉDÉ PERMETTANT L'OBTENTION DE NANO-DISPOSITIFS À SEMI-CONDUCTEUR COMPRENANT DES FILMS MINCES D'OXYDE MÉTALLIQUE À MOTIF DÉPOSÉS SUR UN SUBSTRAT ET NANO-DISPOSITIFS À SEMI-CONDUCTEUR CORRESPONDANTS},
author = {O Soppera and Zan Hsia-Wen and H -C Lin and F Stehlin and A Spangenberg and F Wieder and C -C Yeh},
number = {WO2016177694},
keywords = {},
pubstate = {published},
tppubtype = {patent}
}
|
Soppera, O.; Hsia-Wen, Zan; Lin, H. -C.; Stehlin, F.; Spangenberg, A.; Wieder, F.; Yeh, C. -C. ROCÉDÉ PERMETTANT L'OBTENTION DE NANO-DISPOSITIFS À SEMI-CONDUCTEUR COMPRENANT DES FILMS MINCES D'OXYDE MÉTALLIQUE À MOTIF DÉPOSÉS SUR UN SUBSTRAT ET NANO-DISPOSITIFS À SEMI-CONDUCTEUR CORRESPONDANTS Patent WO2016177694, 0000. @patent{Soppera2016b,
title = {ROCÉDÉ PERMETTANT L'OBTENTION DE NANO-DISPOSITIFS À SEMI-CONDUCTEUR COMPRENANT DES FILMS MINCES D'OXYDE MÉTALLIQUE À MOTIF DÉPOSÉS SUR UN SUBSTRAT ET NANO-DISPOSITIFS À SEMI-CONDUCTEUR CORRESPONDANTS},
author = { O. Soppera and Zan Hsia-Wen and H.-C. Lin and F. Stehlin and A. Spangenberg and F. Wieder and C.-C. Yeh},
number = {WO2016177694},
keywords = {},
pubstate = {published},
tppubtype = {patent}
}
|
Cabannes-Boue, B. Exploitation en ingénierie macromoléculaire de la photolyse des composés de type thiocarbonylthio Thèse 0000, (Directeur de thèse : Julien Poly). @phdthesis{Cabannes-Boue2017b,
title = {Exploitation en ingénierie macromoléculaire de la photolyse des composés de type thiocarbonylthio},
author = { B. Cabannes-Boue},
institution = {ED182},
note = {Directeur de thèse : Julien Poly},
keywords = {},
pubstate = {published},
tppubtype = {phdthesis}
}
|
Anfar, Z.; Ahsaine, H. A.; Zbair, M.; Amedlous, A.; Fakir, A. A. El; Jada, A.; Alem, N. El Recent trends on numerical investigations of response surface methodology for pollutants adsorption onto activated carbon materials: A review Article de journal Dans: Critical Reviews in Environmental Science and Technology, 0000. @article{Anfar,
title = {Recent trends on numerical investigations of response surface methodology for pollutants adsorption onto activated carbon materials: A review},
author = { Z. Anfar and H. A. Ahsaine and M. Zbair and A. Amedlous and A. A. El Fakir and A. Jada and N. El Alem},
doi = {10.1080/10643389.2019.1642835},
journal = {Critical Reviews in Environmental Science and Technology},
abstract = {Nowadays, water pollution has been considered a global concern on environmental sustainability, calling for high-performance materials in effective pollution treatments. Adsorption approach has great potential to eliminate persistent inorganic and organic compounds. Activated carbon (AC) materials including their composite materials have been largely investigated under various experimental conditions as low-cost, promising adsorbents to remove contaminants from water resources. In this review, the authors report the most recent development in activated carbon materials for the removal of organic and inorganic pollutants and its modeling counterpart using response surface methodology (RSM) statistical calculations. We also highlights up-to-date studies for the removal of organic pollutants and heavy metals from water using activated carbon materials as adsorbents with a focus on structure-to-properties and the effects of surface functions on adsorption processes. This review also summarizes for the first time the advantages and disadvantages of RSM method in the investigations related to adsorption of pollutants to assess the potential opportunities and challenges for the application of activated carbon materials in wastewater treatment. The critical analyses and conclusions highlighted in this present study should be of benefit to environmental scientists, chemists and engineers interested in the use of AC and optimization tools in environmental remediation.},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
Nowadays, water pollution has been considered a global concern on environmental sustainability, calling for high-performance materials in effective pollution treatments. Adsorption approach has great potential to eliminate persistent inorganic and organic compounds. Activated carbon (AC) materials including their composite materials have been largely investigated under various experimental conditions as low-cost, promising adsorbents to remove contaminants from water resources. In this review, the authors report the most recent development in activated carbon materials for the removal of organic and inorganic pollutants and its modeling counterpart using response surface methodology (RSM) statistical calculations. We also highlights up-to-date studies for the removal of organic pollutants and heavy metals from water using activated carbon materials as adsorbents with a focus on structure-to-properties and the effects of surface functions on adsorption processes. This review also summarizes for the first time the advantages and disadvantages of RSM method in the investigations related to adsorption of pollutants to assess the potential opportunities and challenges for the application of activated carbon materials in wastewater treatment. The critical analyses and conclusions highlighted in this present study should be of benefit to environmental scientists, chemists and engineers interested in the use of AC and optimization tools in environmental remediation. |
[No title] Divers 0000. @misc{nokey,
title = {[No title]},
keywords = {},
pubstate = {published},
tppubtype = {misc}
}
|
